isometric isometric title scale date dr dwg rev the information contained in this document is proprietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 200msp1t1b1m7qeh 2:1 5/25/2005 ST211031 c jb 1 1 p.c. mounting 5.59 [.220 in] 8.13 [.320 in] 5.08 [.200 in] n 6.00 [.236 in] 25 ~ pos. 3 pos. 1 9.00 [.354 in] 2.54 [.100 in] n 4.39 [.173 in] flat .76 [.030 in] 2 13 pos. 1 pos. 2 pos. 3 switch function none on on 2-3 n/a 2-1 a 14924 released for production 5/25/05 jb note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 3a @120vac, 1a @250vac 6. electric life: 30,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. hardware to be shipped bulk t200001 - hexnut - qty 2 t200000 - lockwasher - qty 1 t200002 - lockring - qty 1 11. denotes critical parameter. circuit: spdt 4.01 [.158 in] 5.08 [.200 in] 2.54 [.100 in] .51 [.020 in] 3.30 [.130 in] 5.08 [.200 in] 2.54 [.100 in] 5.08 [.200 in] n 1.09 [.043 in] 1 2 3 .51 [.020 in] 200msp1t1b1m7qe (t211031) b 15590 change hex nut from t200015 12/6/05 ph c 16058 update dims and switch function 5/30/06 ct
|